Curriculum Vitae

 

Reza Alizadeh, PhD
Professor of Chemical Engineering


 Nationality: Iranian,  Date of birth:1977,    Place of Birth: Marand        Marital status: Married 

Position: Professor in Chemical Engineering,
Address: Faculty of Chemical Engineering Sahand University of Technology P.O.Box 51335/1996 Sahand New town Tabriz, Iran
Phone:+984133459158
Fax:  +984133444355
Email:    r.alizadeh@sut.ac.ir,        alizadeh2@gmail.com     
 
Education:
B.Sc.     Shiraz University,     Petrochemical Engineering
M.Sc.  Amirkabir University, Chemical Engineering
Ph.D.    Amirkabir University, Chemical Engineering
 
Graduate thesis:
B.Sc. thesis: Simulation of carbon dioxide unit of Shiraz petrochemical complex with design II software (Dr Rahimpour)
M.Sc. thesis: Modeling of the gas-solid catalytic reactions in impinging streams reactors
(Professor Morteza Sohrabi)
Ph.D. thesis: Modeling and kinetic study of the catalytic effect of zinc oxide on the reduction of inorganic compounds with methane. Supervisors: Professor Jamshidi, and Dr. Ale Ebrahim
 
Research Fields:
1- Nanomaterial preparation (Synthesis, characterization, application and modeling)
2- Gas-Solid reaction (Theory, modeling, kinetic and experiments)
3- Environmental clean up processes (Air and water and waste water treatment)
4- Catalyst preparation (Synthesis, characterization, application and modeling)
5- Natural Gas Utilization
6- Computational fluid dynamics (CFD)
 
Professional Experience:
 
2018 to now       Professor, Chemical Engineering Department, Sahand University of 
                                   Technology, Sanahd New Town, Tabriz, Iran
 
2013-2018        Associated  Professor, Chemical Engineering Department, Sahand   Technology, Sanahd New Town
2008 -2013:      Assistant Professor, Chemical Engineering Department, Sahand  University of  Technology, Sanahd New
2007-2008:      Visiting Scholar, University Of New South Wales (UNSW) Sydney- Australia
2002-2006:     Research Assistant, Chemical Engineering Department, Tehran Polytechnique University

Research and industrial activities:
Training in Shiraz Petrochemical Complex
Supervisor of lab - pilot scale and industrial projects.
Professional training for XRD machine (UNSW).
Professional training for STA machine.
Kinetic study and mathematical Modeling of catalytic and non-catalytic reactor.
Study on a new solution technique for coupled PDE in gas solid reactions.
Mathematical modeling of impinging streams reactor
Study on adsorbed natural gas (ANG) process
 Wastewater treatment
Study on mercury pollution.
Study on mercury removal from petrochemical wastewater by activated carbon.
Study on catalyst preparation with CVD and MOCVD method.
Project control and management
Study on sulfur pollutant removal.
 Professional training for material flow Cost Accounting(MFCA)
Kinetic study and mathematical modeling of Barite Reduction by methane.
Kinetic study and mathematical modeling of strontium sulfate Reduction by methane.
Kinetic study and mathematical modeling of nickel oxide Reduction by methane.
 Kinetic study of titanium dioxide reduction and nitridation by methane-hydrogen-nitrogen containing gas in packed bed reactor.
 Study on Hydrogen sulfide removal.
Molybdenum Carbide synthesis and their applications
Computationl fluid Mechnic Industrial projects

Official activities:
1- Head of the higher education affairs of chemical engineering faculty           2009-2011
2- Vice chairman of chemical engineering faculty, Sahand University of Technology    2011-2014
3- Head of chemical Engineering faculty, Sahand University of Technology     2014-2018
4-Technology Affairs Manager of Sahand University of Technology      2018- Present
 
Patent:
Alizadeh, Fatehifar, Fouladpanjeh, Sonochemical synthesis of  nano-catalyst sulfur dioxide hydrogenation. Iranian Patent.
Fatehifar, Alizadeh, Fouladpanjeh, Sonochemical synthesis of iron oxide on silica nano-catalyst sulfur dioxide hydrogenation. Iranian Patent.
Fatehifar, Alizadeh, Karimi, Jamili, synthesis of  nano-catalyst selective oxidation of carbon monoxide. Iranian Patent
Alizadeh, Fatehifar, Haghlesan, Preparation of ethylbenzene dehydrogenation catalyst from industrial spent catalyst
 
Teaching Experience:
Advanced Reaction Kinetics and Reactor Design
Advanced Engineering mathematics
Advanced Conduction heat transfer
Advanced fluid mechanics
Advanced Convection heat transfer
Petroleum Engineering Heat transfer
Heterogeneous catalytic and non-catalytic reaction
Advanced Drying technologies
Fluid mechanics
Thermodynamics
Journal Papers:
1- "Catalytic effect of zinc oxide on the reduction of barium sulfate by methane". R.Alizadeh, E. Jamshidi, H. Ale Ebrahim. Thermochimica Acta, Vol. 460,2007, p 44.
2- "Kinetic study of nickel oxide reduction by methane". R. Alizadeh, Esmail Jamshidi, Habib Ale ebrahim, Chemical engineering and technology, vol.30 (8), 2007, p1123.
3- "Transformation of methane to synthesis gas over metal oxides without using catalyst". R.Alizadeh, E. Jamshidi, G. Zhang. Journal of Natural Gas chemistry, Vol. 18 No 2, 2009, p.124-130
4- "Modeling of catalyst effect on the reduction rate enhancement of barium sulfate by methane and developing two environmentally friendly processes." R.Alizadeh, E. Jamshidi, H. Ale Ebrahim. A.A Ebrahimi, Iranian Journal of chemical Engineering( IAChE), Vol. 7, No 1, 2010
5- "Optimal Control Method of Exit Pollutants of Sulfur Recovery Unit in an Oil Refinery" L. Khazini, E. Fatehifar, R. Alizadeh, Iranian Chemical Engineering Journal ( IAChE)Vol. 10 - No. 54 (2011) (In Persian)
6- " Application of Taguchi Method for Optimization of Amine- Based Tail Gas Treating Unit in Petroleum Refineries", L. Khazini, E. Fatehifar , B. Fouladpanjeh, R. Alizadeh, Energy Sources, Part A, 709–718, 2014,Volume 36, Issue
7- "Kinetic study of synthesis of titanium carbide by Methanothermal reduction of titanium dioxide". R.Alizadeh, O.Ostrovski, Iranian journal of materials sience & engineering(IJMSE), Vol. 8,Number 1, Autumn 2011
8- "Estimation and evaluation of new CO, CO2 and NOx emission factors for gas flares using pilot scale flare". A. Talebi, E. Fatehifar, R. Alizadeh, D. Kahforoushan, Energy Sources, Part A, 36:719–726, 2014
9- "Thermodynamic Equilibrium Modeling of Tri-Reforming of Methane" M. Abdollahifar, M. Haghighi, R. Alizadeh , Iranian Chemical Engineering Journal ( IAChE) Vol. 11 No. 60 (2012) (In Persian)
10- "The study of the Performance of various reducing factors in the catalytic reduction on the sulfur dioxide and converting it into elemental sulfur", M. Kanani , R. Alizadeh, E. Fatehifar, Farayandno Scientific- Propative Monthly-March 2012- 35,36 Issue(In Persian)
11- "Fire retardants and mechanism of their performance in polymers and coatings- A review"., M.Salehi, R.Alizadeh, M. Mahdavian, Journal of Studies in Color World, 3(1392)/ 21-36(In Persian)
12- "Application of Finite Element Method for Modeling of Multi-tube Fixed Bed Catalytic reactors" P.Roohi, R.Alizadeh, E.Fatehifar, M.Salami, Published by Chemical Product and Process Modeling ,Volume 9, Issue 1, Pages 1–8, ISSN (Online) 1934-2659, ISSN (Print) 2194-6159, DOI: 10.1515/cppm-2013-0030, November 2013
13- "Using Dynamic Model for Determination of Heat Losses in Cold Weather from a Typical House in Tabriz Constructed by Lightweight Concrete Blocks", M. Darghahi, R.Alizadeh, Published by Energy efficiency journal;Vol.7, page: 609-626; 2014, DOI 10.1007/s12053-013-9243-5
14- "Preparation of Thin Membrane Layers of Polyamide-Polyether Block Copolymer (PEBA) on the Ceramic Nanocomposite Support for Separation of CO2 from CH4 and N2", Y.Bayat, A. Babaluo, R.Alizadeh, Journal of Separation Science and Engineering (JSSE Journal), Vol.4. No.1, page:. 69-75(In Persian)
15- "Simulation of gas absorption into string-of-beads liquid flow with chemical reaction", S. M. Hosseini, R. Alizadeh, E. Fatehifar, A. Alizadehdakhel, Heat and Mass Transfer journal Vol. 50 Pages:1393-1403 (2014)
16- "Kinetic study of the PVC/TiO2 nanocomposites photodegradation under accelerated UV and visible light exposure",S.GhaebiMehmandoust, R. Alizadeh, A. Babaluo, Published by Polymers for Advanced Technologies, (Polym. Adv. Technol.) 2014, Vol. 25, page: 799–8082014,DOI: 10.1002/pat.3298 
17- "Synthesis and characterization of nanostructured CuO/CeO2catalysts via ultrasound assisted techniques used for selective oxidation of CO" A.Karimi, E. Fatehifar, R.Alizadeh, Iranian Journal of chemical Engineering( IAChE), Vol., No 1,2014
18-"Experimental Study and Modeling of Hydrogen Sulfide Absorption with Amine Solutions in a Wetted Wire Column”, M.Ghasemzadeh, R. Alizadeh, E. Fatehifar, P.Roohi, M. Banihashemi, Journal of Separation Science and Engineering (JSSE Journal), Vol.7, No 1,2015 (In Persian)
19-"Thermodynamic study of transformation of methane to synthesis gas over metal oxides" P.Roohi, R.Alizadeh, E.Fatehifar, International Journal of Thermophysics(IJOT), Vol. 36 , 2015
20-"Steady State Modeling of Multi-Cylinder Dryers in Corrugating Paper Machine" S.ghodbanan, R.Alizadeh and Sirus shafiei, Drying Technology Vol. 33: p.1474–1490, 2015
21-"Effect of long time exposure on the chemical and physical properties of polyvinyl chloride/titanium dioxide nanocomposites" S.Mehmandoust, P.Sokhandani, M.Abdi, A.Babaluo, R.Alizadeh, Journal of Thermoplastic Composite Materials January Vol.29, 2016
22-"Effect of second metal on the selectivity of Mn/H-ZSM-5 catalyst in methanol to propylene process" N. Hadi, A. Niaei, S.R. Nabavi, M. Navaei Shirazi, R. Alizadeh, Journal of Industrial and Engineering Chemistry, Vol.29.pp.52-62, 2015
23-"Simulation and Optimization of Styrene Monomer Production Using Neural Network", M. Aghayarzadeh, R. Alizadeh, S. Shafiei, Iranian Journal of Chemical Engineering, Vol. 11, No. 1 (Winter), 2014, IAChE
24-"Analytical investigation of temperature changes by the forced convection in a porous bed with consideration of viscous dissipation", A.Karimi, R. Alizadeh, Tabriz Mechanic Research and Scientific Journal. Vol.46 No.2(summer), (In Persian) 
25-"Simulation of hydrogen desorption from large metal hydride storages and investigation of efficiency enhancement by using metal fins", S.M.Hosseini, R.Alizadeh, H.Targholizadeh, Modares Mechanical Engineering,Vol.15,No.11,pp.63-72,2015(In Persian)
26-"An intelligent approach to design and optimization of M-Mn/H-ZSM-M:Ce,Cr,Fe,Ni) catalysts in conversion of methanol to propylene", N.Hadi, A.Niaei, SR.Nabavi, R.Alizadeh, M.N Shirazi,B. Izadkhah Journal of the Taiwan Institute of Chemical Engineers, Vol. 59,pp. 173-185, 2016
27-"Thermodynamic Study and Methanothermal TPR Synthesis of Molybdenum Carbide", P.Roohi, R.Alizadeh, E.Fatehifar, International Journal of Minerals, Vol.23,p. 339-347,2016
28-" Modeling of Ethylbenzene Dehydrogenation Catalyst Deactivation on an Industrial Scale", A.Haghlesan, R.Alizadeh, E.Fatehifar, Petroleum Science and Technology Journal (PET), Vol. 34, Issue 6, pp. 499-504, 2016
29- "Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine " , S.ghodbanan, R.Alizadeh and Sirus shafiei . Iranian Journal of Chemical Engineering, Vol. 13, pp.57-70, 2016 
30- "Simulation of Carbon Dioxide Absorption by Monoethanolamine Solution in Wetted Wire Column", S.Abouali, R.Alizadeh, E.Fatehifar, E.Soroush , Chemical Engineering & Processing: Process Intensification, Vol.102,pp. 59-69, 2016
31- "Modeling and optimization of removal of toluene from aqueous solutions using iron oxide nanoparticles by RSM method", N.Gharibzadeh, E.Fatehifar, R.Alizadeh, A.Haghlesan, Modarres civil-environmental eng. Journal, Vol.16No2,pp.203-213,2016(In Persian)
32-"Rapid degradation of contaminated soil with 2-methylpropane-2-thiol by H2O2/KMnO4/NaClO system: process modeling and optimization", P.roohi, E.Fatehifar, R.Alizadeh,  Asia-Pacific Journal of Chemical Engineering, DOI: 10.1002/apj
33-"Dry Reforming of Methane over Nano-Mo2C/Al2O3 Catalyst: Effect of Carburization Conditions on Excess Carbon Deposition " P.Roohi, R.Alizadeh, E.Fatehifar Energy Sources, Part A. Journal. Vol.38, 2016
34-"Evaluation of Spent Catalyst Structural Changes during Ethylbenzene Dehydrogenation in Different Technologies", A.Haghlesan, R.Alizadeh, E.Fatehifar, Iranian Journal of Chemistry and Chemical Engineering (IJCCE), Vol. 36, No. 1, 2017,45-57
35-"Ultrasonic assisted synthesis and characterization of xcuo/ceoc2–γal2o3 nanocatalysts", A Karimi, E Fatehifar, R Alizadeh, M Jamili, A Jafarizad, Iranian Journal of Chemical Engineering , Vol.13 NO.3 
36-" Optimization for energy consumption in drying section of fluting paper machine",S Ghodbanan, R Alizadeh, S Shafiei, Thermal Science Journal, Vol.21,(2017) 1419-1429
37-" Mathematical modeling and optimization of sonication remediation of soil polluted with 2-methylpropane-2-thiol", P.roohi, E.Fatehifar, R.Alizadeh, Advances in Environmental Technology 3 (2015) 137-146
38-"Regeneration of Spent Caustic of Olefin Unit in a Bubble Column Reactor: Treatment and Recovery ",A. Karimi,E.Fatehifar, R.Alizadeh,I.Ahadzadeh, Environmental Progress & Sustainable Energy, Vol.36 No.2,(2017) 341-347
39- " Regeneration and Treatment of Sulfidic Spent Caustic using Analytic Hierarchy Process ",A. Karimi,E.Fatehifar, R.Alizadeh,I.Ahadzadeh, Environmental Health Engineering and Management Journal, Vol.36,(2017) 341-347
40-" Investigation of compressor driven metal hydride heat pumps (CDMHHP) by using numerical simulation" S.M.Hosseini, R.Alizadeh, H.Targholizadeh, Tabriz Mechanic Research and Scientific Journal. Vol.46 No.3(Fall), (In Persian) 
41-"Reactivation of an industrial spent catalyst as an environmental waste by ultrasound assisted technique for using in Styrene production" A.Haghlesan, R.Alizadeh, Chemical Engineering & Processing: Process Intensification, Vol.110,(2016) 64-72
42- "CO2/O2Oxidative Dehydrogenation of Ethane to Ethylene over Highly Dispersed Vanadium Oxide on MgO Promoted Sulfated Zirconia Nanocatalyst: Effect of Sulfation on Catalytic Properties and Performance", P.Taghavinezhad, M.Haghighi, R.Alizadeh, Korean Journal of Chemical Engineering. Vol.35(5),(2017) 1346-1357
43- "Selective Production of Propylene from Methanol over Nanosheets of Metal-Substituted MFI Zeolites", N.Hadi, R.Alizadeh, A.Niaei, Journal of Industrial and Engineering Chemistry, Vol.54,(2017) 82-97
44- "Modeling and Optimization of Fast Degradation of Contaminated Soil with 2-Methylpropane-2-Thiol by Modified Fenton Process", P.roohi, E.Fatehifar, R.Alizadeh, Modares Civil Engineering Journal (M.C.E.J),Vol.17, No.4, October 2017
45- "CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst", N.Hadi, A.Niaei, R.Alizadeh, accepted by Iranian Journal of Chemical Engineering.
46-"Sonosynthesis of VOx/MCM-41 Nanocatalyst Enhanced by various Metal Oxides (Mg, AL, Zr) for CO2-OxidativeDehydrogenation of Ethane to Ethylene" , P.Taghavinezhad, M.Haghighi, R.Alizadeh. Microporous & Mesoporous Materials, Vol.261,(2018) 63-78
47- "Adsorption Modeling of CO2 in Fluidized Bed Reactor”, S.Yaghoobi, R.Alizadeh, R.Zarghami, Chemical Engineering Research and Design, Vol.129,(2018) 111-121
48- "Durable and highly selective tungsten-substituted MFI metallosilicate catalysts for methanol to propylene process by designing a novel feed-supply technique", N.Hadi, A.Niaei, R.Alizadeh, Comptes Rendus Chimie Journal, Vol.21,(2018)
49- "Sonoprecipitation dispersion of ZnO nanoparticles over graphene oxide used in photocatalytic degradation of methylene blue in aqueous solution: Influence of irradiation time and power " M. Zarrabi, M.Haghighi, R.Alizadeh,  Ultrasonics Sonochemistry, Vol.48, 2018, P. 370-382
50- "Solar-light-driven photodegradation of organic dyes on sono-dispersed ZnO nanoparticles over graphene oxide: Sono vs. conventional catalyst design", M. Zarrabi, M.Haghighi, R.Alizadeh, Separation and Purification Technology, Vol.211, 2019, P. 738-752
51-"Enhanced Sono-Dispersion of Bi5O7I and Bi2ClHO3 Oxides over ZnO Used as Nanophotocatalyst in Solar-Light-Driven Removal of Methylene Blue from Water", M. Zarrabi, M.Haghighi, R.Alizadeh, Journal of Photochemistry and Photobiology A: Chemistry
52-"Synthesis and characterization of MFI zeolite nanosheets for optimizing the dominant operational conditions of methanol to propylene process", N.Hadi, R.Alizadeh, A.Niaei, Accepted by Journal of Nanostructures
53-"Influence of aging temperature and Mg/Zr molar ratio on transformation of C2H6 to C2H4 over VOx catalyst supported on Mg–Zr nanocomposite " , P.Taghavinezhad, M.Haghighi, R.Alizadeh. Research on Chemical Intermediates, Vol.45,(2019) 1907-1927
54-"Simulation of Fuel Storage Hazards Associated With Petroleum Refineries Tanks ",
M.Pourgol, M.Pourghafari, R. Alizadeh, M. Kaleibar and M. Soleimani, Accepted by ASCEASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering.
 
 
 
 
 
Conference Papers
q       R. Alizadeh, Nano-Molybdenum Carbide Preparation: A New Methanothermal Technique For Controlling Excess Carbon, Global Congress & Expo on Materials Science & Nanoscience 2016
q       Ehsan Andalib, Reza Alizadeh, Masoud Haghshenasfard, "Numerical Simulation of MEA-Film Flow Along a Vertical String in Single Wetted Wire Column for CO2 Capturing Process", 5th International conference on Recent Innovations Chemistry and Chemical Engineering, Tehran- Iran
q       M. Pourghafari, M. Pourgol, R. Alizadeh, M.Raheli , M. Soleimani, "Deterministic hazard assessment for petroleum refinery products storage tanks: case study of tabriz refinery" ASME 2017 International Mechanical Engineering Congress and Exposition IMECE2017, USA, Florida   
q       Rezan*, A.Noor, N. Shoparwe, R. Alizadeh and P. Roohi , "Kinetic modeling of liquefied petroleum gas (LPG) reduction of titania in MATLAB", 15th Asian Congress of fluid mechanics 2016, T.Yin, S.Ramakrishnan, S., Malaysia
q       "Study the Effect of Partial Charge Parameterization on the Phase Behavior of Carbon Dioxide" The 9th International Chemical Engineering Congress & Exhibition 2015, M. Najafi, R. Alizadeh*, J. Jahanbinsardroodi, M. Sokhandani, Shiraz, Iran
q       "Structural Changes and Activities of Regenerated Spent Catalyst for Ethylbenzene Dehydrogenation", The 9th International Chemical Engineering Congress & Exhibition 2015, A. Haghlesan, Reza Alizadeh, E. Fatehifar
q       N.Ibrahim,S. Ramakrishnan,S. Rezan, N.Baharun ,R.Alizadeh and P. Roohi ,"Non-isothermal Kinetic Modelling For Hydrogen Reduction of FerricOxide Using Matlab", , International Conference on Functional Materials and Metallurgy 2014,Malaysia Pulau Pinang Materials Science Forum
q       Roohi, Alizadeh*, Fatehifar, Jafarizad, Synthesis and physicochemical characterization of Nano-Molybdenum Carbide by Methanothermal method, nanotr10 international conference 2014. Istanbul-turkey
q       P.Taghavinezhad, M. Haghighi, R.Alizadeh, Microwave Assisted Combustion Synthesis of Li/MgO Nanocatalyst with Various Fuel Ratios Used in Production of Ethylene from Ethane, 5th International Congress on Nanoscience & Nanotechnology (ICNN2014, Tehran- Iran
q       P.Taghavinezhad, M. Haghighi, R.Alizadeh, Influence of Active Phase Composition on Catalytic Properties and Performance of Li/MgO Nanocatalyst Used in Oxidative Dehydrogenation of Ethane to Ethylene by Carbon Dioxide, 5th International Congress on Nanoscience & Nanotechnology (ICNN2014, Tehran- Iran
q       R. Norouzi, S. Jamshidi, A. Haghlesan, A.A. Babaluo, R. Alizadeh, Synthesis, Characterization and Performance of Potassium Promoted Iron Oxide Nano-Catalyst for Dehydrogenation of Ethylbenzene to Styrene, The 8th International Chemical Engineering Congress & Exhibition
q       T.W.Giap, S.Ramakrishnan,S.R. Sheikh, A. Hamid, R.Alizadeh and P. Roohi, Kinetic modelling for hydrogen reduction of ferric oxide using matlab,International Conference Science Technology & Social Sciences
q       M Nabavinia, R Alizadeh, AB Khoshfetrat, Computational Fluid Dynamics Model to Optimize Air-Lift Bioreactor Geometry for Stem Cell Expansion, 9Th Royan international congress on stem cell Biology and Technology
q       Roohi, Alizadeh*, Fatehifar, Thermodynamic Study of Methanothermal Carburization of Tungsten Trioxide: a New Route for Tungsten Carbide Synthesis, The 8th International Chemical Engineering Congress & Exhibition 
q       Haghlesan, Alizadeh*,Fatehifar, Chavoshbashi, Tarabkhah,Tahmasebi,Shakeri, Deactivation Study on Industrial Catalyst of Ethylbenzene Dehydrogenation, The 8th International Chemical Engineering Congress & Exhibition
q       S. Yari,R.Alizadeh, E.Fatehifar, Thermokinetics Modeling of Claus Furnace Unit in the Presence of NH3 for Determining the Optimum Operating Conditions, 15th Iranian physical chemistry conference university of Tehran, Tehran,  
q       S. Yari,R.Alizadeh, E.Fatehifar, Synthesis of siliceous MCM-48 and NiO/SiO2 mesoporous material via Ultrasound assisted sol-gel method, 15th Iranian physical chemistry conference university of Tehran, Tehran,  
q       A.Karimi, E.Fatehifar, R.Alizadeh,CuO/CeO2 and CuO/CeO2 γ-Al2O3 Synthesis Nano-Catalysts by Ultrasound Method for CO Selective Oxidation,International Congress on Nanoscience & Nanotechnology (ICNN2012) Kashan, I. R. Iran
q       Roohi; Alizadeh; R. Fatehifar; Salami,"The Effect of Thermo-physical Properties of Catalyst on the Hot Spots Region in the Multi-Tube FBCR",7th International Chemical Engineering Congress & Exhibition Kish, Iran, 21-24 November, 2011
q       Ghasemzadeh, R. Alizadeh, Fatehifar, Banihashemi."Modeling and Simulation of Hydrogen Sulfide Absorption with Amine Solutions in a Wetted Wire Column "7th International Chemical Engineering Congress & Exhibition Kish, Iran, 21-24 November, 2011
q       A. Talebi, E. Fatehifar, R. Alizadeh, D. Kahforoushan, Air pollution mitigation, monitor, control technology, International conference on environment 2010 (ICENV 2010) Penang, malaysia
q       Kanani, M., R. Alizadeh, E. Fatehifar, “Sonochemical Synthesis of SO2 Hydrogenation Nanocatalysts”, Nanotechnology Conference and Exposition; Applications and Industrial Development, Imam Khomeini International University, Qazvin, Iran, May 2010.
q       Kanani, M., R. Alizadeh, E. Fatehifar, “Thermodynamic modeling of SO2 hydrogenation to H2S in SCOT process”, Fuel, Energy and Environment National Congress, Kermanshah University of Technology, Kermanshah, Iran, May 2010.
q       Kanani, M., R. Alizadeh, E. Fatehifar, “Preparation and Characterization of Various Transition Metal Nanocatalysts Over Al2O3 Using Sonochemical Method”, 3rd International Congress Nanoscience and Nanotechnology, Shiraz University, Shiraz, Iran, 9-11 Nov. 2010.
q       " Control of claus unit Tail gas in an oil refinery", L. Khazini, E. Fatehifar, M.A. Kaynejad,R. Alizadeh, 2nd International conference on Environmental and Computer Science. 2009
q       Oral presentation in the 5th international chemical engineering congress and exhibition Reza Alizadeh, Esmail Jamshidi, Habib Ale ebrahim: "Modeling of Catalyst Effect on the Reduction of Barium Sulfate by Methane"
q       Oral presentation in the 5th international chemical engineering congress and exhibition Reza Alizadeh, Esmail Jamshidi, Habib Ale ebrahim: "Kinetic study of nickel oxide reduction by methane"
q       Oral presentation in the first Iranian oil-gas and petrochemical congress and exhibition, Reza Alizadeh, Esmail Jamshidi, Habib Ale ebrahim: "Using Natural gas instead of coal for elimination or drastic reduction of greenhouse gas emission in metal processing companies".
q       Presentation in the Eighth National Iranian Chemical Engineering Congress, Mashad, Iran, 20-23 September 2003. Reza Alizadeh, Morteza Sohrabi: "Measurement of holdup and residence time distribution of solid particles in a continuous two impinging streams catalytic reactor".